Palm Rest - HP ProBook 4325s Maintenance And Service Manual

Palm rest

Description
Palm rest (includes TouchPad)
For use in black models:
●
For use with fingerprint reader and 33.8-cm (13.3-in) displays
●
For use with 33.8-cm (13.3-in) displays
●
For use with fingerprint reader and 35.6-cm (14.0-in) displays
●
For use with 35.6-cm (14.0-in) displays
For use in red models:
●
For use with fingerprint reader and 33.8-cm (13.3-in) displays
●
For use with 33.8-cm (13.3-in) displays
●
For use with fingerprint reader and 35.6-cm (14.0-in) displays
●
For use with 35.6-cm (14.0-in) displays
For use in champagne models:
●
For use with fingerprint reader and 33.8-cm (13.3-in) displays
●
For use with 33.8-cm (13.3-in) displays
Before removing the palm rest, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover (see
6. Remove the keyboard (see
Remove the palm rest:
1. Position the computer right-side up with the front toward you.
58 Chapter 4 Removal and replacement procedures
Battery on page 45).
Switch cover on page
Keyboard on page 49)
47)
Spare part number
599549-001
599551-001
599550-001
599552-001
607648-001
607650-001
607649-001
607651-001
625712-001
625714-001