HP ProBook 4325s Maintenance And Service Manual page 108

Select
Device configurations
Built-in device options
Port options
Set Security Level
Restore Security Defaults
100 Chapter 5 Computer Setup
To do this
●
Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:
◦
Use of a USB keyboard in Computer Setup even
when your operating system is not running.
◦
Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
●
Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable HP QuickLook.
●
Enable/disable HP QuickLook preboot authentication on
HP QuickLook boot.
●
Enable/disable HP QuickWeb.
●
Enable/disable HP QuickWeb: Write Protect (disabled
by default).
●
Enable/disable Virtualization Technology.
●
Enable/disable Wake on USB (disabled by default).
●
Enable/disable Numlock state at boot: Off /On (disabled
by default).
●
Enable/disable the wireless switch state.
●
Enable/disable embedded WLAN device radio.
●
Enable/disable Network Interface Controller (NIC).
●
Enable/disable LAN/WLAN Switching (disabled by
default).
●
Set the wake on LAN state.
◦
Disabled
◦
Boot to Network
◦
Follow Boot Order
●
Enable/disable the integrated camera (webcam).
●
Enable/disable Power Monitor Circuit.
●
Enable/disable the audio device.
●
Enable/disable the microphone.
●
Enable/disable the internal speakers.
Enable/disable USB port.
Change, view, or hide security levels for all BIOS menu
items.
Restore the default security settings.