HP ProBook 4325s Maintenance And Service Manual page 87

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard (see
c. Speakers (see
d. Palm rest (see
e. WLAN cables (see
Remove the display assembly:
CAUTION: Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer components.
1. Remove the five T8 slotted-Torx M2.5×6.0 screws (1) that secure the display assembly to the
base enclosure.
NOTE: Your model of the computer have four screws.
2. Disconnect the display cable from the system board (2), and remove all cables from the routing
channels along the top cover (3).
3. Lift the display assembly (4) straight up and remove it from the base enclosure.
Battery on page 45).
Switch cover on page
Keyboard on page 49)
Speakers on page 56)
Palm rest on page 58)
WLAN module on page
47)
65)
Component replacement procedures 79