Table of Contents
Advertisement
2-D Laser Scanner
Product Description
4.4
Interfaces and Connections
The following connections are found on all devices:
Power supply
There is a 4-pin M12 connector on the rear of the housing to connect the power
supply. The following diagram shows the pinning:
Figure 4.2
1
24 V power supply
2
Not used
3
Ground (GND)
4
Not used
MultiPort
The 8-pin M12 connector on the rear of the housing is for service purposes.
Interface:
There is a 4-pin M12 socket on the back of the housing to connect the Ethernet
interface. The following diagram shows the pinning:
Figure 4.3
1
TD+
2
RD+
3
TD-
4
RD-
The connector housing is located on the shield.
1
2
4
3
Power supply connection layout
1
8
7
2
6
3
5
4
1
4
2
3
Ethernet connection layout
11
Advertisement
Table of Contents
