Pepperl+Fuchs OMD10M-R2000-B23 Manual page 22

2-D Laser Scanner
Operation
In each menu item, the values already set are displayed with an underscore.
These values can be changed. However, please note that these values should
only be changed by personnel with the necessary expertise on the impact of the
change.
If no other button is pressed within 60 seconds in the menu levels, the menu is
ended automatically.
Navigation in the Menu
Menu display
Top row
Bottom row
Dash
Operation
Pressing the ENTER button takes you into the menu structure.
Menu entry
End
Back
Change count parameters
Menu display
Top row
Bottom row
Underlined parameter
value
Operation
22
The current menu level is shown in the top row.
The currently selected element is shown in the bottom row.
One dash means that you are in the main menu.
Two dashes mean that you are in the submenu.
You change to the next menu element.
If you hold down (> 1 second) the "Next" button or "ENTER"
button, you will change to the next higher menu element.
You change to the selected menu element
If you hold down (> 1 second) the "Next" button or "ENTER"
button, you will change to the next higher menu element.
This menu entry ends the main menu.
This menu entry changes to the next higher menu element
This shows the current parameter.
This shows the currently selected parameter value.
This is the currently activated value.
You change to the next available parameter value.
If you hold down the button (> 1 second), you will change to
the next higher menu element without changing the
parameter.
You activate the parameter value currently displayed.
If you hold down the button (> 1 second), the displayed
parameter is activated and the display returns to the higher-
level menu element.