Table of Contents
Advertisement
2-D Laser Scanner
Safety
If you are unable to resolve faults, switch the device off. Make sure that the device
cannot be switched back on accidentally. If the device needs to be repaired,
return it to Pepperl+Fuchs. If you open or modify the device yourself, not only are
you endangering yourself and others but you will void any warranty and absolve
the manufacturer from any liability.
Dispose of unusable devices in accordance with the applicable national statutory
regulations.
For instance, you can take the sensor to a designated collection point for
electronic waste.
Danger!
In applications involving stock feeders and moving carriages, care must be taken
to ensure that the applicable safety regulations are observed at all times.
Failure to do so may result in serious or fatal injury!
3.3
Laser Class 1
Class 1 Laser Product
This sensor is certified according to laser protection class 1.
Warning!
Class 1 laser light
The laser light can be an irritant, especially in a dark environment. Do not point
lasers at people!
Maintenance and repairs should only be carried out by authorized service
personnel!
Install the device so that the warning is clearly visible and readable.
Caution: Use of controls, adjustments, or performance of procedures other than
those specified herein may result in harmful laser beam exposure.
3.4
Intended Use
The R2000 laser scanners are measuring devices that are used on automated
transport systems or other movable machinery in intralogistics. They are also
used on stationary equipment in the area of factory and building automation.
Make sure that the devices are used only for their intended purpose.
8
Advertisement
Table of Contents
