12. To install the CD changer (cars with an on-board monitor radio and with CD changer
preparation only))
X18180
X18729
20
17
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
40
41
1
F 39 0955 B
20
1
1
F 39 0957 B
Connect the black 3-pin socket casing of the
0
power supply plug X18180 to the plug casing on
the power supply connector (40) on the CD
changer (1).
Connect the 6-pin socket casing, plug X18729, to
the plug casing (41) on the CD changer (1).
Insert the CD changer (1) with the inserted speed
0
nuts (15) and the two fillister head Philips screws
M4x10 (20) into the holder.
Tighten the two fillister head Philips screws M4x10
(20), which you previously screwed halfway in.
Issue date: 05.2001
EN/32