Table of Contents
Advertisement
6.
To install the CD changer (cars without an on-board monitor, without a DSP amplifier and
with Professional radio SA663 up to production date 02/01 only)
X18729
B1
40
X18126
40
B
25
B1
B
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
B
F 39 0907 B
B
F 39 0909 B
F 39 0910 B
X18126
40
039 0001 B
0
!
The installation of the control cable B for the
CD changer is only required, if the black
6-pin socket casing X18729 on the control
cable for the CD changer is not tied back on
the audio wiring harness.
Lay control cable B along the audio wiring harness
0
as follows.
Lay control cable B from the radio (40) under the
centre console to the left.
Lay control cable B between the transmission
tunnel and carpet along the audio wiring harness
under the left seat to the B pillar and along the
door sill to the rear window shelf.
Thread control cable B through the rubber
0
grommet (40) into the boot to the installation site of
the CD Changer and secure it with cable ties.
Connect branch B1, silver 12-pin socket casing on
0
the control cable B to the black 17-pin socket
casing X18126 on the radio connection plug and
secure it with a retaining clip (25).
Connect socket casing X18126 to the radio (40).
Issue date: 05.2001
EN/12
Advertisement
Table of Contents
