BMW 65 12 0 151 239 Installation Instructions Manual

Parts and Accessories

Installation Instructions

CD Changer Retrofit
BMW Z4 (E 85)
These installation instructions do not apply to cars with SA648 (BMW CD radio)

Important information

The retrofit kit is for use within the BMW dealership organisation only.
Subject to technical modifications.
Target group
The target group for these installation instructions is specialist personnel trained on BMW cars with the
appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and
work instructions in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
The installed cables are to be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
After the installation work the retrofit must be coded using DISPlus, MoDiC III or GT-1 via the Retrofit path.
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit.
The various sections contain corresponding information.
SA 609 Navigation system
SA677 Professional hi-fi system
Ordering instructions
Coax cable D must be ordered as well for cars with SA 677 (see EPC for part number and documentation).
Installation time
The installation time for cars without SA 609 is approx. 2.5 – 3 hours, for cars with SA 609 approx. 2 hours.
The installation times may vary depending on condition of the car and the equipment in it.
Pictograms
denotes instructions that draw your attention to special features.
denotes the end of the instruction or caution text.
!
Retrofit kit No. 65 12 0 151 239 and 65 12 0 301 482
Installation Instructions No. 01 29 0 151 240
!
Issue date: 01.2003
!