7 .
To install the CD changer (cars without an on-board monitor, without a DSP amplifier and
with Professional radio SA663 after production date 03/01 only)
X18729
B1
Push the shrink hose (3) over branch E2, silver 10-pin plug casing on adapter cable E, and
connect branch B1, silver 10-pin socket casing on control cable B to it.
!
As you connect B1 to E2 ensure that it is correctly positioned, see figure.
All sharp metal and plastic detents are to be removed from plug connection B1 and E2 using
an angle cutter.
!
There must be no sharp edges or corners on plug connection B1 and E2.
Push the shrink hose (3) over the plug connection B1 and E2 and shrink it using a hot air blower.
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
B
F 39 0907 B
B1
3
E2
0
!
The installation of the control cable B for the
CD changer is only required, if the black 6-pin
socket casing X18729 on the control cable for the
CD changer is not tied back on the audio wiring
harness.
E2
Issue date: 05.2001
E2
B1
F 39 0908 B
EN/17