9.
To install the CD changer (cars without an on-board monitor with a DSP
amplifier only)
40
12
16
9
17
V
H
1
41
42
X18180
D2
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
F 39 0931 B
16
21
F 39 0932 B
40
V
H
41
F 39 0933 B
41
40
1
F 39 0960 B
Push the expanding nut (12)
0
into the existing hole (40).
Place three speed nuts M5 (17) on to the base
0
holder (9).
Insert the base holder (9) and secure it with the
hexagonal self-tapping screw (21) and two cap
nuts M5 (16).
Remove the three transport guard screws (40)
0
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (41) and set the
adjustment mechanism (42) with a straight slot
screwdriver to V (vertical installation) and then re-
affix both covers (41).
Connect the black 3-pin socket casing of the
0
power supply plug X18180 to the plug casing on
the power supply connector (40) on the CD
changer (1).
Connect branch D2, straight plug on the coaxial
cable D to the coaxial connector (41) on the CD
changer (1).
Secure the coaxial cable D with cable ties.
Issue date: 05.2001
EN/25