BMW 65 12 0 029 649 Installation Instructions Manual page 24

8. To install the CD changer (cars with an on-board monitor and without a DSP amplifier only)
V
H
1
41
42
A4/X18180
C2/X18729
20
17
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
40
V
H
F 39 0928 B
40
41
1
F 39 0929 B
20
1
1
F 39 0930 B
Remove the three transport guard screws (40)
0
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (41) and set the
adjustment mechanism (42) with a straight slot
screwdriver to V (vertical installation) and then re-
affix both covers (41).
41
Connect branch A4, black 3-pin socket casing on
0
the power supply cable A or the standard power
supply plug X18180 to the plug casing on the
power supply connector (40) on the CD changer
(1).
Connect branch C2, black 6-pin socket casing on
the control cable C or the standard plug X18729 to
the plug casing (41) on the CD changer (1).
Insert the CD changer (1) with the inserted speed
0
nuts (17) and the two fillister head Philips screws
M4x10 (20) into the holder.
Tighten the two fillister head Philips screws M4x10
(20), which you previously screwed halfway in.
Issue date: 05.2001
EN/24