BMW 65 12 0 029 649 Installation Instructions Manual page 22

8. To install the CD changer (cars with an on-board monitor and without a DSP amplifier only)
X18729
Push the shrink hose (3) over branch E2, silver 10-pin plug casing on adapter cable E, and
connect branch C1, silver 10-pin socket casing on control cable B to it.
!
As you connect C1 to E2 ensure that it is correctly positioned, see figure.
All sharp metal and plastic detents are to be removed from plug connection C1 and E2 using
an angle cutter.
!
There must be no sharp edges or corners on plug connection C1 and E2.
Push the shrink hose (3) over the plug connection C1 and E2 and shrink it using a hot air blower.
0
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
0
!
The installation of the control cable C for the
CD changer is only required, if the black 6-pin
socket casing X18729 on the control cable for the
CD changer is not tied back on the on-board
monitor wiring harness.
C
F 39 0923 B
Issue date: 05.2001
EN/22