To Install The Cd Changer (Cars With An On-Board Monitor Radio And With Cd Changer Preparation Only) - BMW 65 12 0 029 649 Installation Instructions Manual

12. To install the CD changer (cars with an on-board monitor radio and with CD
changer preparation only)
16
2
15
20
1
15
V
H
1
41
42
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Installation Instructions No. 01 29 0 029 574
18
18 11
9
17
F 39 0950 B
16
F 39 0951 B
20
F 39 0953 B
40
V
H
41
F 39 0954 B
Place three speed nuts M5 (17) on to the base
0
holder (9).
Insert the front CD changer holder (10) and secure
it with three hexagonal screws M5x14 (18).
17
Insert the strut (2) and secure it with two plastic
0
nuts M5 (16).
Secure the two retaining bushes (15) on the left-
0
hand side of the CD changer (1) with two fillister
head Philips screws M4x10 (20).
Half screw in two fillister head Philips screws
M4x10 (20) on the right-hand side of the CD
changer (1).
Remove the three transport guard screws (40)
0
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (41) and set the
adjustment mechanism (42) with a straight slot
screwdriver to V (vertical installation) and then re-
affix both covers (41).
Issue date: 05.2001
EN/31