Trouble Shooting - Webb WEH30 Operator's Manual & Parts List

Before operating the machine, please ensure you are fully aware of the instructions, failure to do
so, could invalidate your manufacturer's warranty.
1. For best results, place the lawnmower on the edge of the lawn, mow in a forward direction.
2. Then at right angles at the end of each turn, slightly overlapping the previously cup strip.
3. The next time you mow the lawn, try to work at right angles to the previous cut. This will
help prevent unevenness in the soil surface, which can build up if you always mow in the
same direction.

TROUBLE SHOOTING

Problem
The lawnmower is not cutting?
Wheel does not turn?
The cut is uneven?
Answer
Grass is too high
Height adjustment required
Stone is lodged into gear of
wheel.
Foreign material between
cylinder & cutter bar.
The blade may be damaged
Height adjustment required
OPERATION
Fix
Use suitable tool to reduce grass
height to below 40mm.
Adjust to suitable even height
Inspect & remove .
Wear gloves to protect hands
from blades and remove
material.
Visit your local Webb dealer to
have the blade inspected.
Adjust to suitable even height.