Webb WER21HW Operator's Manual

Webb WER21HW Operator's Manual

Petrol lawnmower

Advertisement

Quick Links

OPERATOR'S MANUAL AND PARTS LIST
PETROL LAWNMOWER - WER21HW
Spares & Support: 01793 333212
www.webblawnmowers.co.uk
Before use please read & understand this manual, paying particular attention to
the safety instructions.
193805002
15/01/2015

Advertisement

Table of Contents
loading

Summary of Contents for Webb WER21HW

  • Page 1 OPERATOR’S MANUAL AND PARTS LIST PETROL LAWNMOWER - WER21HW Spares & Support: 01793 333212 www.webblawnmowers.co.uk Before use please read & understand this manual, paying particular attention to the safety instructions. 193805002 15/01/2015...
  • Page 3: Table Of Contents

    To ensure that you get the best results from your Petrol Lawnmower please read all of these safety and operating instructions carefully before using this product. TABLE OF CONTENTS PRODUCT SPECIFICATION Product Specifications…..2 Model number Safety Rules…………………..3 WER21HW high wheel self propelled type Assembly/Pre-Operation..5 Petrol engine 190CC Operation……………………..9 Engine speed 3000/min Maintenance…………………11...
  • Page 4: Safety Rules

    Before Use a) Read the instructions carefully: Be familiar with the controls and the proper use of the equipment. b) Never allow children or people unfamiliar with these instructions to use the lawnmower. Local regulations may restrict the age of the operator. c) Never mow while people, especially children, or pets are nearby.
  • Page 5 m) Disengage all blade and drive clutches before starting the engine. n) Start the engine or switch on the motor carefully according to instructions and with feet well away from the blade(s). o) Do not tilt the lawnmower when starting the engine or switching on the motor. p) Do not start the engine when standing in front of the discharge chute.
  • Page 6: Assembly/Pre-Operation

    SYMBOLS The following symbols can be found on the machine to remind you of the care and attention that are required during use. The symbols mean: DANGER – Rotating Warning! Keep hands Read the blades. Keep hands and feet clear of the Operator’s and feet out of cutting deck when the...
  • Page 7 INSTALL ATTACHMENTS Please note your lawn mower may have been shipped with the mulching plug already fitted under the rear grassbox flap. The mower has four different operating modes. 1. Collecting: • Ensure that the side cover is closed. • Fit the grassbox by lifting the rear flap on the mower and hook the front of the box to the shaft on the mower.
  • Page 10: Operation

    OPERATION Drive lever Push handle Operator Presence Control Bar Brake lever - must be held down to the handle to start the engine. Release to stop the engine. Starter handle - used for starting the engine. Drive control lever - used to engage the self-propel system. USE YOUR LAWNMOWER ENGINE SPEED The engine speed was set at the factory for optimum performance.
  • Page 11 BEFORE STARTING THE ENGINE ADD OIL Before each use the oil level must be checked and if necessary topped up with SAE30 engine oil. OIL FILLER CAP/DIPSTICK UPPER LIMIT LOWER LIMIT Your lawnmower is shipped without oil in the engine. CAUTION: DO NOT overfill the engine with oil, or it will smoke heavily from the exhaust on startup.
  • Page 12: Maintenance

    START THE ENGINE To start the engine, first check that the spark plug is tightened and that the machine is filled with sufficient oil and petrol. NOTE: Due to the protective coating on the engine, a small amount of smoke may be present during the first use of the product and should be considered normal.
  • Page 13 CLEANING Carefully clean the machine with water after each cut; remove the grass debris and mud accumulated inside the chassis to avoid their drying and thus making the next start-up difficult. The paintwork on the inside of the chassis may peel off in time due to the abrasive action of the cut grass; in this case, intervene promptly by touching up the paintwork using a rustproof paint to prevent the formation of rust that would lead to corrosion of the metal.
  • Page 14: Maintenance Schedule

    MAINTENANCE SCHEDULE REGULAR SERVICE PERIOD Before First Every 3 Every 6 Every Every Two Page Each Month Months Months ITEM Year Years or 250 Hrs Perform at every indicated month or operating 5 Hrs 25 Hrs 50 Hrs hour interval, whichever comes first. 100 Hrs Engine oil Check...
  • Page 15: Storage

    Tune up Specifications ITEM SPECIFICATION MAINTENANCE Spark plug gap 0.028-0.031in (0.7-0.8 mm) Refer to page 13. Valve clearance (cold) IN:0.06±0.02mm See your authorised dealer EX;0.08±0.02mm Other specifications No other adjustments needed. STORAGE The same petrol must not remain in the tank for more than 30 days. Thoroughly clean the mower and store it in a dry place.
  • Page 16: Parts Diagram

    Parts Diagram...
  • Page 17: Parts List

    Parts List REF PART NO DESCRIPTION QTY REF PART NO DESCRIPTION WE104-1 Foam Handle Cover WE104-39 Drive V Belt WE104-2 Upper Handle WE104-40 B&S 675 Engine WE104-3 Brake Lever WE104-41 Rear Discharge Cover Spring WE104-4 Drive Lever WE104-42 Rear Discharge Cover WE104-5 Hex Flange Bolt M6x30/8.8 WE104-43...
  • Page 18 REF PART NO DESCRIPTION QTY REF PART NO DESCRIPTION WE104-77 Belt Cover Bracket Right WE104-109 8" Wheel WE104-78 Bag Cover Ventilation WE104-90 8" Inner Wheel Cover WE104-79 Handle Cap WE104-91 Carriage Bolt M8x25/8.8 WE104-80 Grass Collector Top WE104-92 Front Bumper WE104-81 Grass Collector Frame WE104-93...
  • Page 19: Declaration Of Conformity

    EC Declaration of Conformity We, Importer Handy Distribution SN3 5HY Declare that the product Model: WER21HW Complies with the following directives: 2006/42/EC- Machinery Directive 2004/108/EC- Electromagnetic Compatibility Directive 2000/14/EC amended by 2005/88/EC- Noise Emission in the Environment by Equipment for Use Outdoors Directive.
  • Page 20: Warranty

    2. Period of Warranty All Webb, Handy Pro (Brushcutter & Long Handle Hedgecutter only) and Sanli domestic products 2 years from the original date of sale to the first domestic user. 90 days from the original date of sale to the professional/commercial user.
  • Page 21 GJ HANDY & CO LTD USER WARRANTY POLICY 3. Not covered by this warranty The warranty policy does not cover any depreciation or damages caused by ordinary wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack of transportation or accident. The warranty policy does not cover any costs necessary for the standard periodic maintenance services instructed by the operators manual, or service parts replacement which would include oil, filters, tyres, belts, brake linings, fuses, blades, seals and other service parts unless it can be proven that the item has...
  • Page 22: Also Available

    • • • • & & • • • • & & • • • •...

Table of Contents