Table of Contents
Advertisement
Quick Links
Push Rear Roller
Cylinder Lawnmower
WEH18
193880002
Operator's Manual
Please read & understand this manual, paying particular attention to the safety instructions, before use.
The manufacturer reserves the right to change the product specifi cation and livery according to continues product improvements.
Advertisement
Table of Contents
Related Manuals for Webb WEH18
Summary of Contents for Webb WEH18
- Page 1 Push Rear Roller Cylinder Lawnmower WEH18 193880002 Operator’s Manual Please read & understand this manual, paying particular attention to the safety instructions, before use. The manufacturer reserves the right to change the product specifi cation and livery according to continues product improvements.
-
Page 3: Table Of Contents
CONTENTS SPECIFICATIONS SAFETY INSTRUCTIONS MAINTENANCE & STORAGE COMPONENTS ASSEMBLY OPERATION TROUBLE SHOOTING PARTS DIAGRAM & LIST WARRANTY DECLARATION OF CONFORMITY... -
Page 4: Specifications
INSTRUCTION MANUAL SPECIFICATIONS Model WEH18 Product Number 193880002 Height of Cut 25mm-76mm Collector 22 litre Number of Blades Blade Material Hardened Steel The manufacturer reserves the right to change the product specification and livery according to continued product improvements. -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product. Read & understand operator’s manual before using the machine. Failure DANGER to follow instructions could result in death or serious injury. Always wear thick gardening gloves to protect your hands when Wear foot protection or unpacking the machine or sensible shoes when using working with the cutting the lawnmower cylinder. SHARP ROTATING BLADES Keep all bystanders & animals at least 6 metres Keep hands out of the way away from the machine of all moving parts. during operation. If approached, stop the machine immediately. Safety alert symbol. Used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in serious injury. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in serious injury CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. - Page 6 INSTRUCTION MANUAL STAY ALERT Do not operate the lawnmower while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly. Do not use this lawnmower when you are tired or distracted from the job at hand. Be aware of what you are doing at all times. Use common sense. AVOID DANGEROUS CONDITIONS Make sure there is adequate surrounding workspace. Cluttered areas invite injuries. Keep your work area clean with sufficient light. Keep area around the lawnmower clear of obstructions, stones, sticks, wires and other debris or foreign bodies which could cause damage to the lawnmower. INSPECT YOUR MACHINE Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and drive mechanisms. Vibration during use may cause these to loosen. Replace damaged, missing or failed parts before using. Warning labels carry important information. Replace any missing or damaged warning labels. DRESS PROPERLY Do not wear loose clothing, gloves, scarfs, neckties or jewelry (rings, wrist watches), which can be caught in moving parts. Wear protective hair covering to contain long hair, preventing it from getting caught in machinery. DO NOT use whilst barefoot or wearing open toed footwear. KEEP BYSTANDERS AND CHILDREN AWAY Keep unauthorised persons a minimum distance of 6 metres away from the machine. Do not allow children to handle, use, or climb on the lawnmower. DO NOT OVERREACH Keep proper footing and balance at all times, particularly if using on slopes. The lawnmower should not be used on steep slopes and always be sure of footing. AVOID INJURY FROM UNEXPECTED ACCIDENT Keep hands out of the way of moving parts, particularly the cutting cylinder. Do not place any part of your body or any tool e.g. Shovel in the drum during operation. When operating, do not pass hands through the clearance between frame, roller and cutting cylinder. The hardened steel blades are very sharp. DO NOT FORCE TOOL Always work within the rated capacity. Do not use the machine for a purpose for which it was not intended. MAINTAIN YOUR MACHINE WITH CARE Clean the lawnmower immediately after use. Keep the lawnmower clean to ensure it operates to it’s full and safest performance. When maintaining this lawnmower, only the manufacturer’s original replacement parts should be used. The use of non-original manufacturer parts may invalidate your warranty.
-
Page 7: Maintenance & Storage
MAINTENANCE & STORAGE WARNING Improper maintenance & storage of the machine may void your warranty. Keep the machine clean for better and safer performance. MAINTENANCE • Before each use, check all nuts & bolts to be sure they are sufficiently tightened. • We recommend only manufacturer original parts are used when maintaining this machine. Failure to do so could invalidate your manufacturer’s warranty. • The cutting cylinder blades should be sharpened every two years, or sooner when damaged by foreign objects to maintain performance. CLEANING • Keep your lawnmower clean. • Thoroughly clean the lawnmower at the end of each use, paying attention to grass cuttings in and around the wheels, roller and blades. • We suggest regular application of multi-purpose oil or lubricant (i.e WD-40). This should be applied to all cutting surfaces and cutting reel axle shaft. • Never put hands inside the cylinder when it is rotating. STORAGE For years of trouble free service, make sure the lawnmower is clean and dry before s toring. • Before storing, clean the lawnmower thoroughly as indicated above. • Store indoors or in a protected area during severe weather and winter months. •... -
Page 8: Components
INSTRUCTION MANUAL COMPONENTS 1. Top Handle 2. Mid Handles 3. Bottom Handle 4. Rear Roller 5. Height Adjustment Assembly 6. Wheel 7. Grass Collector 8. Cutting Cylinder 9. Grass Delivery Plate... -
Page 9: Assembly
ASSEMBLY It is recommended that you wear gardening gloves when unpacking, adjusting, assembling and maintaining the lawnmower. Remove the machine and contents from the carton. Be sure the carton is empty before discarding. If you require any assistance with regards to the contents of the lawnmower contact us: Tel: 01793 333212 - Mon – Fri 8.00am – 5.30pm Email: customerservice@webblawnmowers.co.uk (excl. Bank Holidays) STEP 1 – HANDLE CAUTION This operation must be done close to the cutting cylinder blade. We strongly recommend the use of thick gardening gloves on both hands and the lawnmower body is secured to stop the cutting cylinder blade from rotating. • Insert the middle handles into the top handle. Line up holes and insert bolt and tighten with wing nut. Ensure the concaved section of the middle handles are facing inwards. Slot the lower handle over the pins on the main body of the mower and secure with the • supplied E-Clips. • Align the middle handles to the lower handles, insert bolt and tighten with wig nuts x4. STEP 2 – GRASS COLLECTOR • The grass collector has two positions, depending on the height of grass being cut. The upper torsion bar (Fig. 7 – a) is ideal for the upper cutting heights of the machine. If • using the lower heights, position using lower torsion bar (Fig 7 – b). - Page 10 INSTRUCTION MANUAL ADJUSTMENTS CUTTING PERFORMANCE IMPORTANT: The stay sharp system is engineered to cut grass without contact between the blades. This cutting system is precision set during the factory assembly process. However, since slippage may occur during shipping, handling or use, it is very important to check the cutting performance prior to first use and periodically thereafter. Slippage can occur in two directions, therefore the following two checks ae recommended to evaluate cutting performance. Both checks should be performed on both the left and right sides of the mower. Checking the cutting performance and adjusting if needed, are the most important things you can to to ensure that your mower always performs to its optimum performance. PREPARATION You will need several 1” wide strips of standard printer paper, A4 size in length and a pair of sturdy gardening gloves. CHECK 1: DO THE BLADES MAKE CONTACT? To check if the blades make contact, face the front of the mower and slowly pull the cutting reel downwards, one blade at a time, through a full rotation. If you hear scrapping or feel resistance, skip the to Adjusting the Blade section of this manual. NOTE: If the cutting reel and static bottom blade make contact, the mower will be difficult to push and will dull the blade. CHECK 2: DO THE BLADES CUT CORRECTLY? To check if the blades cut correctly, you will need to check the blades on both sides of the mower. To check the machine is cutting correctly, place a piece of good quality paper, along the whole length of the fixed bottom blade (from underneath the lawnmower), with each of the five cutting blades. This should provide evidence of a good even cut. WARNING Keep your fingers away from the cutting area. If most of the blades cut on both sides, the cutting system is set correctly. If you experience any blades not cutting, go to Adjusting the Blade section of this manual.
- Page 11 ADJUSTING THE BLADES Before adjusting the blades, source a 13mm open end spanner(Not supplied). Fig.11 Turn the two locking bolts (A & B) counter-clockwise on both side plates of your mower. Fig.12 Adjust both top adjustment bolts positioned on both sides of your mower. If the blades are making contact, turn the adjustment bolts clockwise, while rotating the cutting reel, stopping as soon as the blade lose contact. If the blades did not cut the paper, turn the adjustment bolts counter clockwise, while rotating the cutting cylinder, until the blades make contact. Fig.13 When properly adjusted, the cutting cylinder and bottom static blade should be just short of making contact. When the blades are correctly adjusted, firmly tighten the locking bolts on the side plates, you previously loosened. If issues still persist, repeat adjustment steps. ADJUSTING THE CUTTING HEIGHT This mower has 9 cutting height settings, between 12-75mm. Move the height adjuster handle/arm up and down the guide for your chosen height of cut. Fig.14...
-
Page 12: Operation
INSTRUCTION MANUAL OPERATION Before operating the machine, please ensure you are fully aware of the instructions, failure to do so, could invalidate your manufacturer’s warranty. 1. Walk briskly for maximum cutting power. The faster you walk, the better the mower will cut. Never run! 2. For best results, place the lawnmower on the edge of the lawn, mow around the edge of the lawn area, pushing the mower in front of you. 3. Then mow at right angles and at the end of each turn, slightly overlapping the previously cut strip. 4. The next time you mow the lawn, try to work at right angles to the previous cut. This will help prevent unevenness in the soil surface, which can build up if you always mow in the same direction. MOWING TIPS Prior to any cutting, check the cutting area for any debris in advance. Remove stones, bricks, trash and other debris which could cause damage to the cutting blade. If you hit debris, check the blades. If damaged, refer to your nearest approved service dealer for assistance. To maintain a healthy lawn and eliminate the mess created by very long grass, cut off no more than one- third of the grass length as a time. If more than 1/3 of the length is removed, root growth will be impaired and grass will be stressed, making your lawn susceptible to weed invasion, disease and poor appearance. If your lawn gets too high, cut off 1/3 of the length, wait a couple of days and then cut off another third. -
Page 13: Trouble Shooting
• Thoroughly clean the lawnmower at the end of each use, paying particular attention to grass • cuttings in and around the wheels, roller and blades. We suggest regular application of multi-purpose oil or lubricant (i.e WD-40). This should be • applied to all cutting surfaces and cutting reel axle shaft. Never put hands inside the cylinder when it is rotating. STORAGE For years of trouble free service, make sure the lawnmower is clean and dry before s toring. • Before storing, clean the lawnmower thoroughly as indicated above. • Store indoors or in a protected area during severe weather and winter months. • TROUBLE SHOOTING Problem Answer Fix The lawnmower is not cutting? Blade adjustment required See Blade Adjustment Instructions Height adjustment required Adjust cutting height Adjust cutting height I’m not collecting much grass? Grass is too long My mower is not moving freely? Blades are contacting See Blade Adjustment Instructions Visit your local Webb dealer to The cut is uneven? The blade may be damaged have the blade inspected. Blade adjustment required See Blade Adjustment Instructions Height adjustment required Adjust cutting height... - Page 14 PARTS DIAGRAM...
- Page 15 PARTS LIST Item Item Part. No. Description Qty Part. No. Description Qty No. No. WE105-01 Side Plate Torsion bar WE105-28 Head Bolt M6X10 WE105-02 Hub Cap WE105-29 Head Bolt M6X20 WE105-03 Wheel Assembly WE105-56 Roller Small WE105-04 Grass Delivery Plate WE105-31 Bolt WE105-05 Axle WE105-32 Spring Washer 10 WE105-06 Side cover WE105-33 Height Adjuster Handle Height Adjuster WE105-07 Left Gear WE105-34 Assembly WE105-08 Pawl WE105-35...
- Page 16 EC DECLARATION OF CONFORMITY We Handy Distribution Ltd - SN3 5HY (Importer) declare that the product: Designation: Hand Push 18” Cylinder Rear Roller Lawnmower Model(s): WEH18 Product No.: 193880002 Type/Serial No. As per rating label on machine Complies with the following directives: 2006/42/EC - Machinery Directive The conformity assessment procedure followed was in accordance with EN ISO 12100:2010, Notified Bodies: Global Testing Services Ltd, No 968 Meilong West Road, Minhang District, Shanghai, 201104 Shanghai BVCE Certification Testing Technologies Co. Ltd, 4D1th Building, Dongming Square, Lujiazui, Pudong New Area, Shanghai City, China. Authorised signatory and technical file holder Date: 27/09/2017 Signature: Name: Mr Simon Belcher Position: Managing Director Company: Handy Distribution Ltd Address: Murdock Rd, Swindon, Wiltshire, SN3 5HY.
- Page 17 NOTES...
- Page 18 INSTRUCTION MANUAL This Service Book is provided with your Webb, to help you look after your purchase to our recommendations and enable you to take advantage of the 2 year conditional manufacturer domestic warranty*. * Commercial/Professional & Hire users receive a 90 day warranty Present this service book to your authorised Webb repair dealer, whenever a service or a warranty appraisal is required.
- Page 19 SERVICE BOOK 1. Users Statement of Warranty Each new machine is warranted against defective material or assembly of material under normal usage. The warranty applies to the original purchaser, is not transferable and covers faulty parts and the labour involved in replacing and repairing those parts, which are of original manufacture.
-
Page 20: Warranty
It is the owner’s responsibility to ensure that their Webb machine is maintained at specifi c intervals. Any approved Webb service dealer can undertake a service, which are specialised in our products and will be aware of your particular machine and any technical updates which will save valuable time &... - Page 21 SERVICE BOOK Your servicing Webb approved dealer will stamp & date the below relevant sections, when the correct service actions have been completed. PLEASE ENSURE THE SERVICE BOOK IS AVAILABLE FOR THE DEALER, DURING SERVICE WORK. 1st Service This must be stamped by an approved service dealer to qualify for a free second year warranty.
-
Page 22: Service Record
Service Record INSTRUCTION MANUAL 48 Months 60 Months Date Date 72 Months 84 Months Date Date 96 Months 108 Months Date Date 120 Months 132 Months Date Date... - Page 23 & services we provide, including information that we believe is relevant to your and/or your machine. We value your trust by giving us this information about yourself and we are committed to protecting your privacy. From time to time Webb, its associated companies, authorised dealers or third parties working on our behalf may wish to contact you regarding our products, services, offers, technical improvements or just opinions, which may be used for marketing, research or analysis purposes.
- Page 24 Webb Lawnmowers Murdock Road Dorcan Swindon Wiltshire SN3 5HY...