Trouble Shooting - Webb WEER36 Original Instructions Manual

MAINTENANCE INFORMATION
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Wear & Tear parts*: Carbon brushes, cutting blade, collector (* Not necessarily included in the scope of
delivery!)
DISPOSAL & RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment and its accessories are made of various types of material,
such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your
local council.

TROUBLE SHOOTING

PROBLEM
Motor does not start
Reduced Motor Power
The grass collector does
not fill completely
REMEDIAL ACTION
Check the mains connection cable, plug fuse and circuit breaker.
Start on short grass or on an area which has already been mown.
Unplug the mower. Clean the discharge chute/housing, the blade must rotate
freely.
Correct the cutting height.
Correct the cutting height.
Clean the discharge chute/housing.
Have the blade re-sharpened or replaced by an authorised service dealer.
Correct the cutting height.
Allow the lawn to dry.
Have the blade re-sharpened or replaced by an authorised service dealer.
Clean the grille on the grass catcher.
Clean the discharge chute/housing.