Fast Trouble Shooting - Webb WERR17P Original Instructions Manual

Problem Problem Likely cause Likely cause
Out, or almost out, of fuel Out, or almost out, of fuel
Spark plug depleted Spark plug depleted
Spark plug dirty Spark plug dirty
E n g i n e d o e s n o t E n g i n e d o e s n o t
Spark plug not connected Spark plug not connected
start start
Flooded engine Flooded engine
Old petrol in the tank Old petrol in the tank
Water in the fuel tank Water in the fuel tank
Blocked fuel supply Blocked fuel supply
Fuel cap is not venting Fuel cap is not venting
Engine stops often Engine stops often
Wrong type of fuel Wrong type of fuel
Dirty air cleaner lter Dirty air cleaner lter
Engine loses power Engine loses power Incorrect height adjustment Incorrect height adjustment
Blocked fuel cap vent holes Blocked fuel cap vent holes
Loose cutting blade Loose cutting blade
Bent or broken disc/blades Bent or broken disc/blades
Mower vibrates too Mower vibrates too
much much
Excessive grass/dirt build-up Excessive grass/dirt build-up
Disc or blades worn/damaged Replace blades Disc or blades worn/damaged Replace blades
Catcher not tted correctly Catcher not tted correctly
Poor cutting Poor cutting
Incorrect cutting height set Incorrect cutting height set
catching catching
Blocked grass catcher vents Blocked grass catcher vents

FAST TROUBLE SHOOTING

FAST TROUBLE SHOOTING
Suggested remedy Suggested remedy
Fill tank with min unleaded petrol Fill tank with min unleaded petrol
Replace with a suitable new spark plug Replace with a suitable new spark plug
Clean or replace with a new spark plug Clean or replace with a new spark plug
Press rmly on the terminal cover Press rmly on the terminal cover
Remove Spark Plug, clean with appropriate cloth and refit Remove Spark Plug, clean with appropriate cloth and refit
Drain stale fuel and replace with new min unleaded petrol Drain stale fuel and replace with new min unleaded petrol
Contact an authorised dealer Contact an authorised dealer
Ensure the fuel line is not pinched or blocked Ensure the fuel line is not pinched or blocked
You may need to slightly loosen the fuel cap You may need to slightly loosen the fuel cap
Drain petrol tank and ll with new min unleaded petrol Drain petrol tank and ll with new min unleaded petrol
Clean or replace with a new air- lter Clean or replace with a new air- lter
Raise the mower's cutting height lever Raise the mower's cutting height lever
Ensure the 3 holes in the fuel tank cap are clear Ensure the 3 holes in the fuel tank cap are clear
Check and tighten bolts and nuts Check and tighten bolts and nuts
Replace disc or blades Replace disc or blades
Clean and ensure underside clear of build up Clean and ensure underside clear of build up
Reattach carefully and also check for damage Reattach carefully and also check for damage
Adjust the cutting height Adjust the cutting height
Clear and clean the vents Clear and clean the vents