Routing - D-Link DIR-822 User Manual

DIR-822 AC1200 Wi-Fi Router
User Manual

Routing

On the Advanced / Routing page, you can add static routes into the system.
To create a new route, click the Add button. In the line displayed, you can specify the following
parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
After specifying the needed parameters, click the Apply button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the Apply button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the Delete button. Then click the Apply button.
Figure 129. The Advanced / Routing page.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be accessed.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Page 165 of 212
Configuring via Web-based Interface
Description