Using Wps Function Without Web-Based Interface - D-Link DIR-822 User Manual

DIR-822 AC1200 Wi-Fi Router
User Manual

Using WPS Function without Web-based Interface

You can add a wireless device to the router's WLAN without accessing the web-based interface of
the router. To do this, you need to configure the following router's settings:
1. Specify corresponding security settings for the wireless network of the router.
2. Select the WPS Enable checkbox.
3. Click the Apply button.
4. Save the settings and close the web-based interface (click the icon
menu displayed when the mouse pointer is over the System caption in the top left part of
the page, then click the icon
Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the
router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS button of the router, hold it for 2 seconds, and release. The WPS LED will
start blinking.
(Logout)).
Page 140 of 212
Configuring via Web-based Interface
(Save) in the