D-Link DIR-822 User Manual page 149

DIR-822 AC1200 Wi-Fi Router
User Manual
To configure the router as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4GHz /
Broadcast wireless
network 5GHz
Network name (SSID)
BSSID
Network Authentication The authentication type of the network to which the router connects.
When the Open or Shared authentication type is selected, the following fields are available:
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP as
HEX
WEP key length
Encryption Key WEP
(1-4)
If the checkbox is not selected, devices cannot connect to the
relevant band of the router's WLAN. Upon that the router can
connect to another access point as a wireless client.
Wireless network settings
The name of the network to which the router connects.
The unique identifier of the network to which the router connects.
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Keys for WEP encryption. The router uses the key selected from the
Default Key ID drop-down list. It is required to specify all the
fields.
Page 149 of 212
Configuring via Web-based Interface
Description
Description