D-Link DIR-822 User Manual page 86

DIR-822 AC1200 Wi-Fi Router
User Manual
Figure 68. The page for creating a new PPPoE connection. The Ethernet section.
Parameter
MTU
MAC
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC address of your computer icon
( ) to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment)
as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
You can click the Restore default MAC address icon (
set the router's MAC address.
Page 86 of 212
Configuring via Web-based Interface
Description
) to