D-Link DIR-822 User Manual page 28

DIR-822 AC1200 Wi-Fi Router
User Manual
6. In the opened Wireless Network Connection window, select the wireless network
dlink-XXXX
in the 5GHz band) and click the Connect button.
7. In the opened window, enter the network key (see the field Password on the bottom panel
of the device 7
8. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
5 See the field Wi-Fi Name (SSID) 2.4GHz on the bottom panel of the device. For the models of the hardware
version /RU the default network name is DIR_822C1A.
6 See the field Wi-Fi Name (SSID) 5GHz on the bottom panel of the device. For the models of the hardware version
/RU the default network name is DIR_822C1A-5G.
7 For the models of the hardware version /RU the default network key is WPS PIN.
(for operating in the 2.4GHz band) or dlink-XXXX-5GHz
5
Figure 14. The list of available networks.
) in the Security key field and click the OK button.
Page 28 of 212
Installation and Connection
(for operating
6