Static Ipv6 Connection - D-Link DIR-822 User Manual

DIR-822 AC1200 Wi-Fi Router
User Manual

Static IPv6 Connection

In the Connection name field, specify a name for the connection for easier identification.
Fill in the IPv6 address and Gateway IPv6 address fields.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page (for a detailed description of all the connection's parameters, see the
Creating Static IPv6 or Dynamic IPv6 WAN Connection section, page 100).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 56).
Figure 29. Configuring Static IPv6 WAN connection.
Page 46 of 212
Configuring via Web-based Interface