Procomp B683 User Manual page 32

B683/B680
Item
A. Power Management
B. PM Control by APM
C. Video Off Affter
Options
1. Disable
2. User Define
3. Min Saving
4. Max Saving
1. No
2. Yes
Note: If APM is installed, & if there is a task running,
even the timer is time out, the APM will not prompt the
BIOS to put the system into any power saving mode!
Note: − if APM is not installed, this option has no effect
To make the APM function work, users have to install
power.exe (supported by MS-DOS 5.0 or higher) in
Config.exe. To make the Windows 3.1 work regularly, in
" Windows Setup", users have to set the
"Computer" item to " MS-DOS System with APM"
1. NA
2. Suspend
3. Standby
4. DOZE
30
Descriptions
Global Power Management will be
disabled
Users can configure their own power
management
Pre-defined timer values are used such
that all timers are in their MAX value
Pre-defined timer values are used such
that all timers MIN value
System BIOS will ignore APM when
power managing the system
System BIOS will wait for APM' s
prompt before it enter any PM mode
e.g. DOZE, STANDBY or SUSPEND
System BIOS will never turn
off the screen
Screen off when system is in
SUSPEND mode
Screen off when system is in
STANDBY mode
Screen off when system is in
DOZE mode