Procomp B683 User Manual page 27

B683/B680
Boot Up NumLock Status
The default value is On.
On: Keypad is number keys
Off: Keypad is arrow keys
Boot Up System Speed
It selects the default system speed - the speed that the system will run at
immediately after power up.
High: Set the speed to high
Low: Set the speed to low
Gate A20 Option
The Gate A20 Option default setting is fast.". This is the optimum setting for
this motherboard.
Typematic Rate Setting
This determines the typematic rate.
Enabled: Enable typematic rate
Disabled: Disable typematic rate
Typematic Rate (Chars/Sec)
6
8
10
: 6 characters per second
: 8 characters per second
: 10 characters per second
25