Procomp B683 User Manual page 35

B683/B680
Item
I. Suspend Mode
(*) Remark 1
* Remark 1: All items mark with (*) in this menu, will be loaded with
predefined values as long as the item "Power Management" is not configured to
"User Defined"
These items are:
Item "System Doze" , "System Standby" & "System Suspend"
# Remark 2: Although the item "HDD Power Down" is not controlled by
item "Power Management" in terms of timer value, the HDD (s) will not power
down if the global power management is disabled!
Normally, STANDBY mode puts the system into low
speed or 8, screen may be off depend on (E)
Options
1. Disable
2.
1 Min
2 Min
4 Min
8 Min
12 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally, SUSPEND mode puts the system
into low speed or 8 MHz, clock is stopped, screen
may be off depend on (E)
33
Descriptions
System will never enter
SUSPEND mode
Defines the continuous idle
time before the system
entering SUSPEND mode.
if any item defined in (J) is
enabled & active, SUSPEND
timer will be reloaded