Procomp B683 User Manual page 44

B683/B680
How to install the CPU
Prepare the motherboard by installing the supplied Slot 1 CPU, then install
the CPU according to the instructions supplied. Complete the processor
installation by installing the supplied heat-sink support, and connecting the heat
sink power cable to the motherboard connector.
Referential Steps of installing the Slot 1 CPU
This part is only for CPU installation. Regarding to the heat-sink part, please
refer the instructions supplied.
1. Inspect the area around Slot1, verify the position of four around-sockets,
and then locate the small protruding rectangular tab on the side of Slot1
(see diagram).
2. Examine the CPU Retention and attachments. There are three sets of
attachments: 1. The stand itself. 2. The CPU locking caps (two). 3. The
plastic screws (four).
41