Table of Contents
Advertisement
1.2.1 Back Panel
Input Connectors
DVI-I – DVI
Standard DVI signals can input. Additionally this DVI port supports VGA with the use of
10
a DVI to VGA adapter.
The DVI port supports up to HDMI 1.3 if the port format is set to HDMI.
DP
11
Standard DisplayPort signals can input.
HDMI-A – HDMI
12
Standard Genlock signals can input.
Output Connectors
HDMI-A – HDMI LOOP
13
Connect to the HDMI input of the next VENUS X1PRO or the device with HDMI input.
DP
14
Connect to the device which has DP interface.
DVI-I – DVI
15.16
Connect to the monitor or LED display which has DVI interface. (This connector does
not support hotplug).
Control Connectors
DIP Switch
If the two DIP switches are upwards, the device is in normal work, and if they are
4
downwards, the device is in upgrade state. OLED module light is off when the device is
in upgrade state. Some of the button lights turn on, and the device will not work.
RJ45 – Ethernet
5
Connect to Ethernet work for remote control by windows software.
USB-B – USB
6
Connect to Ethernet work for remote control by Windows software and for product
firmware upgrades.
VENUS X1PRO
Chapter 1: Your Product
User Manual
8
Advertisement
Table of Contents
