Software Upgrade - RGBlink VENUS X1PRO User Manual

6.2 Software Upgrade

Please install the USB to serial drive before upgrading the software
1. Connect the device and computer
Connect the USB interface of VENUS X1PRO to the computer with a USB cable (USB-A to
USB-B), as shown in Figure 1 and Figure 2.
2. Get the COM Port
Right click "My computer" iconDevice manager, and get the COM Port (COM *), as shown in
the figure below:
VENUS X1PRO
-64 bit and
Figure 1 USB Cable（USB-A to USB-B）
Figure 2 CONT Interface
Figure 3 COM Port
User Manual
Chapter 6: Appendix
-32 bit.
58