Table of Contents
Advertisement
H 1/2
Turn the rotary knob, and select <H 1/2>, push the knob to confirm, and enter to the menu items
as follows:
->H TOTAL
->HEIGHT 1
Set H total, V total, width and height of each screen according to actual need.
For example, set H total as 3840, V total as 1080, Height 1 is 1080, same with V total.
Set Width 1 as 1920 and Width 2 will be 1920, ( H total <3840> - Width 1 <1920> = Width 2
<1920> ).
As shown in the figure below:
3.6.2 BACKUP MODE
Turn the rotary knob, and select <BACKUP MODE>, push the knob to confirm, and enter to the
menu items as follows:
->BACKUP MODE
VENUS X1PRO
V TOTAL
WIDTH 1
WIDTH 2
RESET
FOUR PORT OUTPUT
User Manual
Chapter 3 : Using Your Product
3840
1080
1920
1920
1080
>>
>>
34
Advertisement
Table of Contents
