Table of Contents
Advertisement
When you finish the configuration, please click OK to save and exit this page.
I
I
-
2
-
1
-
4
D
I
I
-
2
-
1
-
4
D
Available settings are explained as follows:
Item
Network Configuration
Vigor3220 Series User's Guide
192.168.1.254.
IP Pool Counts - Enter the maximum number of PCs that you
want the DHCP server to assign IP addresses to. The default is
50 and the maximum is 253.
Gateway IP Address - Enter a value of the gateway IP
address for the DHCP server. The value is usually as same as
the 1st IP address of the router, which means the router is
the default gateway.
Lease Time - Enter the time to determine how long the IP
address assigned by DHCP server can be used.
Clear DHCP lease for inactive clients periodically -
Whenever a DHCP client requests an IP address from the LAN
DHCP server, the server will give out an IP to this client for a
certain amount of time (e.g., 1 day). However, even if this
client only uses the IP for say 5 minutes, the server still
"reserves" 1 day for that client. Because a DHCP server only
has a limited number of IPs to lease to its DHCP clients, soon
enough all the IPs will be used out and then no one will be
able to get any IPs from this server anymore. Therefore, this
feature is used to get the IP back from inactive clients (i.e.
doesn't use the IP but the server still reserves the IP for him.
e
t
a
i
l
s
P
a
g
e
f
o
r
I
P
R
o
e
t
a
i
l
s
P
a
g
e
f
o
r
I
P
R
o
Description
Enable/Disable - Click Enable to enable such configuration;
click Disable to disable such configuration.
For Routing Usage,
IP Address - Type in private IP address for connecting to a
local private network (Default: 192.168.1.1).
u
t
e
d
S
u
b
n
e
t
u
t
e
d
S
u
b
n
e
t
103
Advertisement
Table of Contents
