Table of Contents
Advertisement
configuration
Unique Local Address
(ULA) configuration
DNS Server IPv6 Address
Management
DHCPv6 Server
Configuration
Advance setting
100
Prefix Length – Type the fixed value for prefix length.
Add – Click it to add a new entry.
Delete – Click it to remove an existed entry.
Such feature is used for the host without assigned IPv6
address to obtain IPv6 address automatically or have an IPv6
address specified manually via ULA configuration. It is
convenient for communication among different subnets.
Auto ULA Prefix – The system will generate the required IPv6
address.
Manually ULA Prefix – A user can type the ULA IPv6 address
manually.
Primary DNS Sever – Type the IPv6 address for Primary DNS
server.
Secondary DNS Server –Type another IPv6 address for DNS
server if required.
Host under LAN can be assigned IP address from Vigor router
via the following method.
SLAAC(stateless) – The IP address (with Prefix) of the
host shall be formed according to RA transmitted by Vigor
router.
DHCPv6(stateful) - The IP address of the host shall be
assigned after communicating with DHCPv6 server for
answering the request of client.
Off – No IP address is assigned.
Other Option (O-bit) – Check this box to enable the O-bit for
obtaining additional information (e.g., DNS) from DHCPv6.
Enable Server –Click it to enable DHCPv6 server. DHCPv6
Server could assign IPv6 address to PC according to the
Start/End IPv6 address configuration.
Disable Server –Click it to disable DHCPv6 server.
Start IPv6 Address / End IPv6 Address –Type the start and
end address for IPv6 server.
More options are offered under the Advance setting. Click
Edit to open the pop-up window.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
