Table of Contents
Advertisement
Server
Application Name
Application
IP Address
Port
Idle Timeout
Scaling
Screen Size
3. Enter the required information.
4. After finished the above settings, click OK to save the configuration.
258
Type a name for such application. The length of the name
is limited to 23 characters.
There are two types offered for you to create an
application profile.
Virtual Network Computing (VNC) – It allows you to access
and control a remote PC through VNC protocol.
Remote Desktop Protocol (RDP) – It allows you to access
and control a remote PC through RDP protocol.
If you choose VNC or RDP, you have to type the IP address
for this protocol.
If you choose VNC or RDP, you have to specify the port used
for this protocol. The default setting is 5900.
If you choose VNC, you have to specify the time for
disconnecting the SSL VPN tunnel.
If you choose VNC, you have to choose the percentage
(100%, 80%, 60%) for such application.
If you choose RDP, you have to choose the screen size for
such application.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
