Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable Open Ports
Comment
WAN Interface
WAN IP
Private IP
Protocol
Start Port
End Port
After finishing all the settings here, please click OK to save the configuration.
122
Description
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN interface that will be used for this entry.
Specify the WAN IP address that will be used for this entry.
This setting is available when WAN IP Alias is configured.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose IP - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of
the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP,
or ----- (none) for selection.
Specify the starting port number of the service offered by
the local host.
Specify the ending port number of the service offered by the
local host.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
