Table of Contents
Advertisement
Available settings are explained as follows:
Item
Check to enable the Filter
Rule
Comments
Index(1-15)
Clear sessions when
schedule ON
Direction
Source/Destination IP
302
Description
Check this box to enable the filter rule.
Enter filter set comments/description. Maximum length is 14-
character long.
Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Check this box to clear the sessions when the above schedule
profiles are applied.
Set the direction of packet flow. It is for Data Filter only. For
the Call Filter, this setting is not available since Call Filter is
only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other LAN.
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
