Page 4
I m p o r t a n t S a f e t y I n s t r u c t i o n s When using exercise equipment, you should always take basic precautions, including the following: Obtaining Service Personal Safety During Assembly Retain this Owner’s Manual for future...
Page 5
B e f o r e Y o u B e g i n Required Tools Assembly Tips Installation Requirements...
Page 6
H a r d w a r e L i s t Part# Size Description Quantity...
Page 7
H a r d w a r e L i s t Part# Size Description Quantity...
Page 14
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the end of Step 3. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 16
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the end of Step 3. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 18
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten the hardware used in this step fi rst. Wrench tighten all the hardware at the end of this step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
Page 20
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: This step is to show you where the pulleys need to be installed and the type of hardware that you will need in order to install them. You must install the pulleys for step 4B and 4C at the same time that you are routing the cables.
Page 22
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: This step is to show you how to route the Lat Cable (#43), attach the cable to the Selector Rod, and how to assemble the Pulley Holder and Lat Bar. You may need more then one person in order to complete this step.
Page 24
S T E P Be careful to assemble all components in the sequence they are presented. NOTE: This step is to show you how to route the Row Cable (#44), and how to assemble the Row Bar. You may need more then one person in order to complete this step. When this step is complete please tighten all bolts...
Page 28
® GLA-348Q.1 www.bodysolid.com Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and specifi cations when we feel it will improve the product. Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
Need help?
Do you have a question about the GLA348Q.1 and is the answer not in the manual?
Questions and answers