Interrupting A Program - Miele PG 8528 Installation And Operating Instructions Manual

Interrupting a program

A program can only be interrupted
or cancelled in operating levels B
and D.
If the door must be opened for urgent
reasons, e. g., if items are moving
around too much or the cleaning
performance needs to be checked:
If a program with a process
requirement is interrupted then
continued, make sure to check the
display upon program completion. If
the display reads
parameters not achieved
was opened after process
parameter monitoring began and so
the process parameter was not
achieved. The program may need to
be repeated.
In operating levels B or D
^ Press the +C button.
The program is interrupted.
The following prompts appear in the
display:
Cancel programme (OK)
or continue (Clear)?
^ Open the door a
Process
, the door
Operating the machine
Note for PG 8528:
Which door can be opened depends
on which setting has been programmed
under "Machine function / Continuous
program" (see the "Programming
manual").
The door on the unclean side can
always be opened, no matter which
parameter has been set.
The door on the clean side can only be
opened if one of the following
parameters are set:
- Interlock,
- Door clean + Interlock,
- Door unclean + Interlock.
,
Caution: Items inside the
machine may be hot. There is the
danger of burning or scalding.
In programs with thermochemical
disinfection, steam containing high
levels of disinfectant can escape.
^ Arrange items securely. Take all
necessary infection control measures
and wear gloves.
^ Close the door a.
^ Press the +C button.
The program continues.
41