Changing The Program Sequence; Changing A Program (Safety Lock); Interrupting A Program; Canceling A Program - Miele WXI 860 WCS Operating And Installation Instructions

Changing a program (safety
lock)
A program, temperature, spin speed, or
selected extra options cannot be
changed once the machine has been
successfully started. This prevents the
machine being operated unintentionally,
e.g., by children.
If the washing machine is switched off
during active program operation, the
standby function does not switch the
washing machine off completely after
15 minutes. Safety functions continue
to be active because there may still be
water inside the drum.

Interrupting a program

 Turn the program selector to the
 position.
 To continue, turn the program
selector to the position of the wash
program that was started.
 
Cancel?
 
 Touch the  sensor button.
The following will appear in the display:
 
Cancel?
 
 Confirm with the OK sensor button.
Tip: If 
Change not possible
the display, the program selector is in
the incorrect position.

Changing the program sequence

Canceling a program

You can cancel a wash program at any
time after it has started.
 Turn the program selector to the
 Turn the program selector to the
The following will appear in the display:
 Touch the OK sensor button.
The suds are pumped away. The
following will appear in the display:
 Wait until the  symbol in the display
 Pull open the door.
 Remove the laundry.
Yes
OK
No
OK
appears in
 position.
Normal program.
 
Cancel?
 
 
 Program Canceled
 
goes out and the door unlocks.
Yes
OK
OK
57