Technical Data - Miele PG 8528 Installation And Operating Instructions Manual

Technical data

Height
Width
Depth
Weight (net)
Operating weight
Voltage (volts)
Connected load (watts)
Fuse rating
Air pressure connection
Steam connection:
with Electric TA
with Steam TA
Water pressure (flow rate)
Cold, hot, and
deionized (DI) water
Room temperature
Relative humidity:
maximum
linear decreasing to
Altitude above sea level
Contamination level
Ingress protection rating (as per IEC
60529)
Noise level in dB (A),
peak LpA for cleaning and drying
cycles
Certification marks
!mark
* At a steam pressure of 250 - 300 kPa, the drying unit reaches a maximum drying
temperature of 90 - 100°C.
#
If the machine is installed above 1500 m, the wash water will boil at a lower
temperature. This may require you to lower the disinfection temperature and
lengthen the holding time (A
56
250 cm (minimum room height)
115 cm
87 cm
approx. 550 kg
approx. 800 kg
see data plate
see data plate
see data plate
600 kPa (required for steam operation)
250 - 1000 kPa / 140 - 180 °C
250 - 600 kPa * / 140 - 164 °C
200 - 1000 kPa overpressure
up to max. 70 °C
5 °C to 40 °C
80 % for temperatures up to 31 °C
50 % for temperatures up to 40 °C
up to 1500 m
P2 (as per IEC/EN 61010-1)
IP20 (ingress of dust)
< 70
CSA, Medical Class II Device Licence
MPG Guidelines - 93/42/EEC, Class IIa
value).
0
#