Guide to the appliance
How the display works
Example for a selection list
16
Depending on the operating level, the following choices are
available in the display:
– a program / the program overview
– the programming menu
– the settings menu J
Settings
In the menu
control system to suit various requirements. For additional
information, please see the "Programming manual".
Main menu
CHANGE TA-COARSE
DIS-VAR-TD
DIS-VAR-TD-IN
Use the buttons - e to move through the menu items.
The marking in the display can be moved using the buttons
-e.
Use the OK button to confirm messages or settings and
change to the next menu or another menu level.
To select a menu item, mark it using the selection buttons
-e, then confirm with the OK button.
A maximum of three menu items or selections can be shown
in the display. A scroll bar at the right of the display shows
that additional menu items or selections are available. Use
the selection buttons -e to display them.
A dashed line signals the end of the list. The last entry on the
list is above the line, the first entry is below it.
J, you can adjust the Profitronic
B
#