Table of Contents
Advertisement
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
There is no spark when you try to
activate the spark generator.
There is no spark when you try to
activate the spark generator.
There is no spark when you try to
activate the spark generator.
The flame extinguishes immedi-
ately after ignition.
The flame ring is uneven.
The burners do not work.
The appliance makes noises.
The flame colour is orange or yel-
low.
The oven does not heat up.
The lamp does not operate.
www.zanussi.com
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
The back lamp
1. Turn the lamp glass cover counterclockwise
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
4. Install the glass cover.
Possible cause
The hob is not connected to an
electrical supply or it is connec-
ted incorrectly.
The fuse is released.
Burner cap and crown are placed
incorrectly.
Thermocouple is not heated up
sufficiently.
Burner crown is blocked with
food residues.
There is no gas supply.
The oven is deactivated.
The lamp is defective.
deactivate the circuit breaker.
to remove it.
heat-resistant lamp.
Check if the hob is correctly con-
nected to the electrical supply.
Refer to the connection diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Place the burner cap and crown
correctly.
After lightning the flame, keep the
spark generator activated for
equal or less than 10 seconds
Make sure that the injector is not
blocked and the burner crown is
clean.
Check the gas connection.
Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
Activate the oven.
Replace the lamp.
Remedy
19
Advertisement
Table of Contents
