Table of Contents
Advertisement
Cancelling the cooking time
Use the
A
button to reset the cooking time to 0:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.
End time
You can delay the time at which you wish your dish to be ready.
The
main oven starts automatically and finishes at the
Æ
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example shown below: It is 10:30 , the cooking time is
45 minutes and you want to finish cooking at 12:30.
Set the function selector for the
1.
Set the temperature selector for the
2.
Press the
0
button twice.
3.
Use the
or
button to set the cooking time.
@
A
4.
Press the
button. The
0
5.
the dish will be ready is displayed.
Use the button
@
or
A
to delay the end time.
6.
Childproof lock
The
Æ
main oven has a childproof lock to prevent children
from switching it on by accident or changing a setting.
The main oven does not respond to any settings. You can still
set the clock and the timer when the childproof lock is
activated.
button
0
arrow.
N
cooking time,
end time or
y
arrow is next
N
main oven.
Æ
Æ
main oven.
is in front of
. The time when
N
y
After a few seconds, the oven adopts the settings and
switches to standby The display shows the time at which the
dish will be ready and the
The symbols
V
see the cooking time counting down in the display and the
arrow will be next to the
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
using the
or
@
A
0
the function selector to the off position. The oven switches off.
Changing the end time
Use the
or
@
A
seconds, the change is adopted. If the timer has been set, first
press the
0
button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A
button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
V
clock, press the
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After the appliance is connected or following a power cut,
the
0
symbol and three zeros are lit in the display. Set the
clock.
Press the
0
button.
1.
The time 12:00 is shown in the display.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
0
button four times.
1.
The time symbols light up in the display and the
next to
.
0
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Switching on the childproof lock
The function selector must be set to the off position.
Press and hold the
The
symbol appears in the display. The childproof lock is
@
activated.
N
arrow is next to the
and
0
go out. When the oven starts, you will
x
symbol. The
0
button. You can set a new cooking time
button. Or press the
0
button to change the end time. After a few
0
button twice.
N
arrow.
timer,
cooking time,
x
button repeatedly until the
0
button to set the clock.
A
button to change the clock.
A
button for approximately 4 seconds.
h
y
symbol.
N
y
symbol goes out.
button twice and turn
end time or
y
0
arrow is next
N
arrow is
N
9
Hide quick links:
Advertisement
Table of Contents
