Table of Contents
Advertisement
Childproof lock
en
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu
is open.
0
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the
arrow to continue to "
¿
1.
Set the end time using the rotary selector.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The
which the operation will be finished appear in the status
bar. The operation starts at the appropriate time. You
can see the cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the
Correcting the end time
This is possible if the oven is in standby.
Press the Start/Stop button.
1.
Press the
button.
0
2.
The Time-setting Options menu opens.
Use the
arrow to switch to "
¿
3.
the end time using the rotary selector.
Press the
button.
0
4.
Press the Start/Stop button.
5.
The oven is on standby.
Cancelling the end time
This is possible if the oven is in standby.
Press the Start/Stop button.
1.
Press the
button.
0
2.
The Time-setting Options menu opens.
Use the
arrow to switch to "
¿
3.
end time back using the rotary selector.
Press the
button.
0
4.
Press the Start/Stop button to start.
5.
The cooking time starts to count down immediately.
16
end".
y
symbol and the time at
y
0
button.
End" and correct
y
End" and turn the
y
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
on/off button.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
seconds. A confirmation note appears in the display
and the
symbol appears in the status bar.
/
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
Press the "On/off" button.
1.
Press the menu button.
2.
The operating modes menu opens.
Use the rotary selector to select "Settings".
3.
Touch the arrow
¿
.
4.
Use the rotary selector to change the values.
5.
Use the arrow
to change to the next settings, and
¿
6.
change them if necessary.
Press the menu button to save.
7.
"Save" or "Discard" appears on the display.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Setting
Options
Select language
Additional languages possible
Time of day
Sets the current time
Date
Sets the current date
Audible signal duration
Short (30 s)
Medium (1 m)
Long (5 m)
Button tone
Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
button for approx. 4
/
Advertisement
Table of Contents
