Table of Contents
Advertisement
Fault
Oven is not heating.
Replacing the bulb
in the oven ceiling
light
Possible reason
The door seal has come
out or is not correctly
assembled.
The door seal is down.
Plug is not connected to
the power socket.
The safety fuse in the
safety fuse box has
blown.
Function selector knob
and heat selector knob
are not correctly adjusted.
Make sure that service personnel who have been trained
by the manufacturer carry out the repairs and other
procedures on the appliance.
If your appliance has not been fixed properly you could be at
great risk.
If the bulb in the oven light fails, it must be replaced.
25 watt heat resistant spare bulbs can be obtained
from our after sales service or your local specialist.
Only use these bulbs.
d
1. Risk of electric shock.
Switch off the circuit breaker in the fuse box.
2. Place a tea towel in the cold oven to prevent
damage.
3. Unscrew the glass cover by turning it
anti clockwise.
Information/correcting
Check the position and fitting of the
door seals, correct as required.
Replace the door gasket.
Connect the plug to the power
socket.
Check the condition of the safety fuse
by looking at the safety fuse box.
Reset the function selector knob and
heat selector knob.
43
Advertisement
Table of Contents
