Replacing The Bulb In The Oven Ceiling Light - Siemens HB 43MB.20B Instruction Manual

Table of Contents

Advertisement

Error message
E011
Replacing the bulb
in the oven ceiling
light
34
Possible cause
A button was pressed
for too long or is
covered.
d
There is a risk of electric shock.
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our experienced after sales
engineers.
If the bulb in the oven light fails, it must be replaced.
40 watt heat resistant spare bulbs can be obtained
from our after sales service or your local specialist.
Only use these bulbs.
d
1. There is a risk of electric shock.
Switch off the circuit breaker in the fuse box.
2. Place a tea towel in the cold oven to prevent
damage.
3. Unscrew the glass cover by turning it
anti clockwise.
4. Replace the bulb with one of the same type.
5. Screw on the glass cover again.
6. Remove the tea towel and switch on the fuse.
Remedy/information
Press all buttons individually. Check
whether a button has jammed or is
covered or dirty.

Advertisement

Table of Contents
loading

Table of Contents