Siemens HP243525M Instruction Manual page 24

Things that must be done
for the gas grill
24
2. Keep on pushing the function selector switch of
the oven and push the ignition button at the same
time.
3. The gas coming out of the lower gas burner of the
oven is ignited by the ignition button. Keep on
pushing the function selector button on the oven
for about 10 seconds to activate the safety system.
4. Check the burning of the gas by looking through
the inspection hole in the bottom iron panel of the
oven. If there are no flames, repeat the above
steps starting with step 1.
5. Close the oven lid slowly.
6. Turn off the function selector switch after 30
minutes.
Heat up the grill in order to clear the odour caused by
first use.
1. Attach the protective sheet under the control
panel. Place the sheet with its longest end facing
the front and the curve in the tip looking down.The
protecting plate is secured using the clips in the
recess below the control panel. Ensure that the
protecting plate is properly engaged in the clips. If
the protecting plate is properly engaged, you will
not be able to pull it any further towards you. You
can now use it safely. If the protecting plate is not
properly engaged, try to insert it into the recess at
a slightly sharper angle and engage it in the clips.
2. Close the oven lid until it is as close as possible to
the protective sheet.