Procedure To Be Applied In The Event Of A Fault - Siemens HP243525M Instruction Manual

Procedure to be applied in the event of
a fault
Fault
Appliance is not operating.
Burners are not burning at all Burners are not burning at all
or not burning correctly. or not burning correctly.
There is no ignition on
burners.
The oven light does not
come on.
The oven door is not closed
correctly
42
Faults generally occur for simple reasons. Please note the
following fault warnings before contacting the after sales
service:
Possible reason
Plug is not connected to
the power socket.
The safety fuse in the
safety fuse box has
blown.
Main gas valve is closed.
Gas valve is closed.
If the appliance is set to
LPG (liquid gas), the gas
holder is empty.
Burner body, cover and
channels, spark plugs and
injectors are
contaminated.
Burner body, cover and
channels are damp.
Burner parts are not set
correctly,covers are
mounted obliquely.
Plug is not connected to
the power socket.
The safety fuse in the
safety fuse box has
blown.
The oven light is faulty.
The door seal is dirty.
Information/correcting
Connect the plug to the power
socket.
Check the conidiotn of the safety fuse
by looking at the safety fuse box.
Open the gas valve.
Open the gas valve.
Change the gas holder with the full
one.
Clean and dry all burner parts.
Dry all burner parts.
Set all burner parts correctly
Connect the plug to the power
socket.
Check the condition of the safety fuse
by looking at the safety fuse box.
Replace the oven light.
Clean the door seal.