What To Do If - AEG BP5014321 User Manual

11.1 What to do if...

Problem
You cannot activate or oper-
ate the oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The core temperature sensor
does not operate.
There is water inside the
oven.
The steam cooking does not
work.
The steam cooking does not
work.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening.
It takes too long to cook the
dishes or they cook too
quickly.
Possible cause
The oven is not connected
to an electrical supply or it is
connected incorrectly.
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
activated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the sock-
et.
There is too much water in
the tank.
Lime obstructs the hole.
There is no water in the tank.
There are lime deposits in
the oven.
The temperature is too low
or too high.
ENGLISH
Remedy
Check if the oven is correctly
connected to the electrical
supply (refer to the connec-
tion diagram if available).
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Replace the lamp.
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
Deactivate the oven and
wipe the water with a cloth
or sponge.
Check the steam inlet open-
ing. Remove the lime.
Fill the water tank.
Clean the water tank. Refer
to "Cleaning the water
tank".
Adjust the temperature if
necessary. Follow the advice
in the user manual.
35